 | Ratings: 1/8 to 5 HP at 230 VAC,
1/4 to 5
HP at 460 VAC |
| Constant torque overload rating: 150% for 1 min. (200% peak) |
| DC injection braking, ramp to stop |
| Electronic reversing |
| Adjustable accel/decel: 0.01 to 6000 seconds |
| Controlled speed range: 40:1 and 100:1 |
| Speed Regulation:
± 0.5 to 1 % with slip compensation
± 0.2 % |
| Drive efficiency: 95% |
| Displacement power factor: 0.98% |
| Output frequency: 0.1 to 400 Hz |
| Frequency resolution:
0.01 Hz with digital reference
0.06 / 60 Hz with analog reference |
| Frequency accuracy:
0.01% with digital command
0.5% with analog command |
| Volts / hertz ratio: infinitely adjustable pattern |
| Open loop vector control |
| DC Injection braking: adjustable amplitude, duration, current limited |
| Torque boost: full range, auto |
| Power loss ride-thru: 0.5 sec. |
| Speed search |
| Auto restart |
| 3 Critical frequency rejection settings |
| Slip Compensation |
| Energy Savings Function |
| PID with loss of feedback function |
| 16-bit microprocessor logic |
| Digital keypad operator with analog speed pot |
| LED status display |
| Copy Keypad Function |
| Remote Mount Keypad Capability |
| RJ-1 1 Style Digital Operator Connector |
| 7 multifunction digital inputs |
| Programmable form C output contact for customer use: 1A at 250 VAC or
30 VDC |
| 24 VDC control logic compatible with sourcing or sinking outputs (PNP or
NPN) |
| Carrier frequency: 10 kHz maximum |
| 16 multi-speed settings plus jog speed |
| Remote speed reference: 0-10 VDC (20 kohms) or 4-20 mA (250 ohms) |
| Signal follower: bias and gain |
| 2 programmable open collector outputs |
| Analog monitor output: 0-10 VDC proportional to output frequency or output current |
| Approximately 200 parameters |
| Digital pulse train input (30 kHz max.) |
| Cooling fan controlled by drive run/stop RS485/RS422 serial communication port
(up to 32 nodes) |
| Baud rate of 19.2 kbps |
| UL and cUL listed; CE approved |
| UL recognized electronic overload |
| MTBF: exceeds 28 years |
