Horizontally split case pumps
Bulletin 185E

List Prices

BASIC UNIT LIST PRICE includes a bronze-fitted pump with packing glands, flexibly coupled to an open drip-proof motor on a steel base. Modification and accessory list prices are shown following the basic unit list prices.

EXPLANATION OF MODEL NUMBERS: The first digit is the pump discharge size; the letters indicate the volute size (SCL=small diameter impeller, SC=medium diameter impeller, SCH=large diameter impeller, SSC=two-stage pump), the middle digits are the motor horsepower, and the last digit is the motor speed (4=4-pole 1750 RPM, 2=2-pole 3450 RPM, 6=6-pole 1150 RPM). (NOTE: Refer to ABC Electric Corp. for 1150 RPM prices.)

NOTE 1: TWO STAGE PUMPS ARE RATED FOR 250# MAXIMUM WORKING PRESSURE AS STANDARD. SINGLE STAGE PUMPS ARE RATED FOR 125# MAXIMUM WORKING PRESSURE AS STANDARD, BUT ARE AVAILABLE FOR 250# MAXIMUM WORKING PRESSURE WITH 250# SUCTION AND DISCHARGE FLANGE CONNECTIONS, AT NO PRICE ADDITION. FOR 250# SERVICE, USE MECHANICAL SHAFT SEALS OR HI-PRESSURE PACKING WITH LOCK RINGS, PLUS STAINLESS STEEL SLEEVES.

NOTE 2: BRONZE LANTERN RINGS FOR PACKING BOXES SHOULD BE USED WHEN THE SUCTION PRESSURE IS LESS THAN 20#. THEY CAN BE FURNISHED WITH TAPPED CONNECTIONS FOR INTRODUCING CLEAR WATER OR WITH TUBING CONNECTIONS FROM THE PUMP VOLUTE.

NOTE 3: STANDARD MECHANICAL SHAFT SEALS HAVE A TEMPERATURE RANGE OF -40°F THRU 225°F. ALL MECHANICAL SEALS ARE FURNISHED WITH BY-PASS LINES FROM THE PUMP DISCHARGE PACK INTO THE SEAL CHAMBERS, TO PREVENT DEAD-ENDING OF ABRASIVES OR TEMPERATURE BUILD-UP.

NOTE 4: USE BALANCED MECHANICAL SHAFT SEALS WHEN THE WORKING PRESSURE EXCEEDS 200# OR WHEN THE SUCTION PRESSURE EXCEEDS 150# (UP THRU 180°F) OR 100# (180°F THRU 225°F).

NOTE 5: BRONZE CASING WEARING RINGS ARE STANDARD ON ALL PUMP SIZES. THIS PRICE ADDITION COVERS DOUBLE WEARING RINGS (IMPELLER AND CASING).

SPECIAL COUPLINGS:
1750 RPM standard couplings are Lovejoy Type L (metal jaws with flexible spacers).
3450 RPM standard couplings are Wood's Type S (metal flanges with flexible sleeve).
To substitute Falk Type T10 (all metal with tapered grid   ---   $309
To substitute Falk Type G20 (all metal gear Type)   ---   840

FILTERS AND ABRASIVE SEPARATORS:
All rated 210°F max. temperature and 125# max. working pressure.
(2) Cuno Type IBI cartridge type filters mounted and piped on pump   ---   $1953
Cuno Type IBI cartridge filters, unmounted, price per filter   ---   540
(2) Doxie Type P abrasive separators, mounted and piped on pump   ---   2592
Doxie Type P abrasive separators, unmounted, price per separator   ---   801

DRIP RIM FOR STEEL BASES:
To add a drip rim under the pump on the standard steel bases, add for all HP's   ---   $450

CAST IRON DRIP-RIM BASES:
To substitute cast iron drip-rim base for the standard flat channel steel base, make the following list price additions (no shipping weight addition is required):