CC/CG/CK Prices

Close-coupled pumps
Bulletin 177F

List Prices

BASIC UNIT LIST PRICE includes a bronze-fitted pump with mechanical shaft seal, close-coupled to an open drip-proof motor. Modification and accessory list prices are shown following the basic unit list prices.

EXPLANATION OF MODEL NUMBERS: The first digit of the model number is the pump discharge size, the letter indicate the volute size (CC=small diameter impellers, CG=medium diameter impellers, CK=large diameter impellers), the middle digits are the motor horsepower, and the last digit is the motor speed (2=2-pole 3450 RPM, 4=4-pole 1750 RPM, 6=6-pole 1150 RPM).
NOTE: Refer to ABC Electric Corp. for 1150 RPM selections and prices.

1750 RPM MODEL	LIST PRICE 1-PH.	LIST PRICE 3-PH.	SHIP'G WEIGHT
1¼CC-1/4-4 1¼CC-1/3-4 1¼CC-1/2-4	$1416 1572 1701	$1611 1638 1662	70# 70 70
1½CC-1/4-4 1½CC-1/3-4 1½CC-1/2-4 1½CC-3/4-4	1443 1599 1728 1974	1683 1662 1689 1794	80 80 80 80
1CG-1/4-4 1CG-1/3-4 1CG-1/2-4 1CG-3/4-4 1CG-1-4	2688 2715 2949 3078 3093	2781 2793 2820 2961 2676	80 80 80 90 120
1½CG-1/4-4 1½CG-1/3-4 1½CG-1/2-4 1½CG-3/4-4 1½CG-1-4 1½CG-1½-4	2781 2805 3039 3171 3183 3351	2871 2883 2910 3054 2766 2859	90 90 90 100 130 140
2CG-1/2-4 2CG-3/4-4 2CG-1-4 2CG-1½-4 2CG-2-4 2CG-3-4	3078 3210 3222 3390 3585 4092	2949 3093 2805 2898 2937 3132	100 130 140 150 160 190
2½CG-3/4-4 2½CG-1-4 2½CG-1½-4 2½CG-2-4 2½CG-3-4 2½CG-5-4	3378 3390 3558 3753 4260 -	3261 2976 3066 3105 3300 3663	130 150 160 180 200 280
3CG-1½-4 3CG-2-4 3CG-3-4 3CG-5-4	3819 4014 4521 -	3324 3363 3558 3924	190 210 230 310

NOTE: Fractional HP 1750 RPM motors require extension shafts when used with CG pump ends, and, therefore, may have higher list prices than some larger HP units.

1750 RPM MODEL	LIST PRICE 1-PH.	LIST PRICE 3-PH.	SHIP'G WEIGHT
1½CK-1-4 1½CK-1½-4 1½CK-2-4 1½CK-3-4 1½CK-5-4	$3612 3780 3975 4482 -	$3195 3285 3324 3519 3885	170# 180 190 200 280
2CK-1½-4 2CK-2-4 2CK-3-4 2CK-5-4 2CK-7½-4	4041 4236 4740 - -	3546 3585 3780 4143 4884	170 190 200 300 370
2CKH-5-4 2CKH-7½-4 2CKH-10-4 2CKH-15-4 2CKH-20-4	- - - - -	5418 6156 6585 7806 8586	350 400 450 600 620
2½CK-2-4 2½CK-3-4 2½CK-5-4 2½CK-7½-4 2½CK-10-4	4404 4911 - - -	3753 3948 4314 5052 5481	200 220 300 370 470
3CK-3-4 3CK-5-4 3CK-7½-4 3CK-10-4 3CK-15-4	5145 - - - -	4182 4548 5286 5715 6936	250 330 400 500 600
4CKL-5-4 4CKL-7½-4 4CKL-10-4 4CKL-15-4 4CKL-20-4	- - - - -	4701 5442 5871 7092 7872	370 440 540 640 660
4CK-7½-4 4CK-10-4 4CK-15-4 4CK-20-4 4CK-25-4 4CK-30-4 4CK-40-4	- - - - - - -	7989 8418 9639 10419 11406 12303 14355	450 470 550 570 700 750 800

3450 RPM MODEL	LIST PRICE 1-PH.	LIST PRICE 3-PH.	SHIP'G WEIGHT
1¼CC-1/3-2 1¼CC-1/2-2 1¼CC-3/4-2 1¼CC-1-2 1¼CC-1½-2	$1350 1404 1533 1623 1986	$1416 1443 1560 1689 2103	50# 50 50 50 50
1½CC-3/4-2 1½CC-1-2 1½CC-1½-2 1½CC-2-2 1½CC-3-2	1560 1650 2013 2337 2754	1584 1716 2130 2352 2430	90 120 130 140 150
1CG-3/4-2 1CG-1-2 1CG-1½-2 1CG-2-2 1CG-3-2 1CG-5-2	2664 2742 2988 3270 3624 -	2688 2781 3039 3066 3093 3363	120 130 140 160 200 200
1½CG-3/4-2 1½CG-1-2 1½CG-1½-2 1½CG-2-2 1½CG-3-2 1½CG-5-2 1½CG-7½-2 1½CG-10-2 1½CG-15-2	2754 2832 3078 3363 3714 - - - -	2781 2871 3132 3156 3183 3456 3792 4365 4950	120 130 140 160 160 210 240 300 360
2CG-3-2 2CG-5-2 2CG-7½-2 2CG-10-2 2CG-15-2	3753 - - - -	3222 3495 3831 4404 4989	160 210 250 380 400

3450 RPM MODEL	LIST PRICE 1-PH.	LIST PRICE 3-PH.	SHIP'G WEIGHT
2½CG-3-2 2½CG-5-2 2½CG-7½-2 2½CG-10-2 2½CG-15-2 2½CG-20-2	$3924 - - - - -	$3390 3663 4002 4572 5157 6195	220# 270 290 400 450 580
3CG-5-2 3CG-7½-2 3CG-10-2 3CG-15-2 3CG-20-2 3CG-25-2 3CG-30-2	- - - - - - -	3924 4260 4960 5418 6456 7158 9918	300 320 430 480 610 630 780
1½CK-5-2 1½CK-7½-2 1½CK-10-2 1½CK-15-2 1½CK-20-2	- - - - -	3885 4221 4794 5379 6417	200 220 350 370 450
2CK-15-2 2CK-20-2 2CK-25-2 2CK-30-2	- - - -	5637 6678 7377 8637	350 450 470 600
2½CK-15-2 2½CK-20-2 2½CK-25-2 2½CK-30-2 2½CK-40-2	- - - - -	5808 6846 7548 8808 10275	370 450 470 620 740
3CK-20-2 3CK-25-2 3CK-30-2 3CK-40-2	- - - -	7080 7782 9042 10509	470 500 650 670

CAST IRON DRIP-RIM BASES:
Up thru 2 HP 1750 RPM; up thru 3 HP 3450 RPM   ---   $510
3 HP thru 10 HP 1750 RPM; 5 HP thru 15 HP 3450 RPM   ---   $810
15 HP thru 25 HP 1750 RPM; 20 HP thru 30 HP 3450 RPM    ---   $1380

OTHER MODIFICATIONS AND ACCESSORIES:
Vibration rail sets	see Sec.8
Fed-Flex flexible hose connections	see Sec.8
Totally enclosed and explosion-proof motors	see Sec.8
Motor information and modifications	see Sec.8
Motor starters and disconnect switches	see Sec.4, VSA pages
Export boxing, list price addition	2% of unit list price
Certified performance curves	no add
Witness tests	refer to ABC Electric

MODEL	DISCH. X SUC. (INS.)	MAX. IMP. DIA. (INS.)	MAX. WKG. PRESS. PSI (1)	HYDRO. TEST PRESS. PSI (1)	STD. MECH. SEAL (2)	SEAL BY PASS LINE (2)	PACK'G GLAND
1¼CC 1½CC	1¼ x 1½ 1½ x 2	5-3/8 5-1/4	125 125	200 200	std. std.	$210 210	n/a n/a
1CG 1½CG 2CG 2½CG 3CG	l x l¼ 1½ x 2 2 x 2½ 2½ x 3 3 x 4	7 7 7 7 7	125 125 125 125 125	200 200 200 200 200	std. std. std. std. std.	std. std. std. std. std.	n/a n/a n/a n/a n/a
1½CK 2CK 2CKH 2½CK 3CK 4CKL 4CK	1½ x 2 2 x 2½ 2 x 2½ 2½ x 3 3 x 4 4 x 5 4 x 5	9-1/2 9-1/2 12 9-1/2 9-1/2 9-1/2 12	125 125 100 125 125 125 125	200 200 150 200 200 200 200	std. std. std. std. std. std. std.	std. std. std. std. std. std. std.	n/a n/a n/a n/a n/a n/a n/a

MODEL	ST.ST. SHAFT SLEEVE	ALL-BRONZE LIQUID END	BZE. CAS'G WEAR'G RING	DOUBLE BOLTED CAS'G(3)	ST.ST. SHAFT	FILTER FOR SEAL(4)	ABRAS. SEP.FOR SEAL(5)	COMPANION FLANGES ON PUMP(6)
1¼CC 1½CC	n/a n/a	$792 909	n/a n/a	n/a n/a	std. refer	$981 981	$1296 1296	$ - 165
1CG 1½CG 2CG 2½CG 3CG	$159 159 159 159 159	1506 1716 1974 2157 2559	$420 420 420 420 420	n/a n/a n/a n/a n/a	refer refer refer refer refer	981 981 981 981 981	1296 1296 1296 1296 1296	156 165 171 210 264
1½CK 2CK 2CKH 2½CK 3CK 4CKL 4CK	159 159 192 159 159 159 192	2832 3234 4755 3729 4431 4611 7938	std. std. std. std. std. std. std.	$279 279 369 279 279 279 369	refer refer refer refer refer refer refer	981 981 981 981 981 981 981	1296 1296 1296 1296 1296 1296 1296	165 171 171 210 264 366 366

NOTE 1: Refer to ABC Electric Corp. regarding 250# working pressure pumps.

NOTE 2: Standard mechanical shaft seals have a temperature range of -40°F thru 250°F. A by-pass line (optional on CC pumps) is furnished from the pump discharge back into the seal chamber to prevent dead-ending of abrasives.

NOTE 3: For maximum working pressures above 150#, double bolting of the casing is recommended for CK pumps.

NOTE 4: Cuno Type 1B1 cartridge filter mounted and piped on pump (125# max. w.p. and 250°F max. temp.).

NOTE 5: Doxie Type P abrasive separator mounted and piped on pump (125# max. w.p. and 250°F max. temp.).

NOTE 6: Includes (1) suction companion flange and (1) discharge companion flange, both American Standard 125# cast iron pipe flanges, plus a gasket and required fasteners for each, all mounted on the pump.