Automatic Laundry tray unit
Bulletin
205B
 |
For
Waste Water Lower Than Sewer Level |
|
Laundry
Tray Water |
|
Sink
Water |
|
Washing
Machine Water |
|
Display-Case
Water |
|
Cold
Condensate Disposal |
|
Factory
Assembled Unit |
|
Easy
Installation |
|
Simple
Maintenance |
|
Pump
and Switch Removable Without Disconnecting Inlet Piping |
|
|
FEATURES
TANK:
Heavy fabricated steel; 10 gallon capacity.
PUMP:
Standard-fitted construction, with stainless steel shaft, bronze bearing and
aluminum non-clog impeller.
MOTOR:
1/3 HP, 1750 RPM, single phase, 60 cycle, 115 volts, with built-in overload
protective device and extension cord with plug.
FLOAT SWITCH:
Motor-mounted float switch is operated by a stainless steel cable and two
displacement weights.
|
Performance Table |
| Capacities |
Pumping Heads |
| 25 |
5 |
| 20 |
10 |
| 15 |
15 |
| 10 |
20 |
LIST PRICE:
covers factory assembled unit for laundry tray service, including (1)
receiver, (1) non-clog pump, (1) float switch asssembly and (1) motor (1/3 HP,
1-phase, 60 cycle, 115 volt, 1750 RPM).
| Model |
HP |
RPM |
Receiver Cap. |
Receiver Mat. |
List Price |
Sh'g Wgt. |
| ALTV |
1/3 |
1750 |
10 gal. |
Steel |
$1665 |
65# |
| ALTV |
1/3 |
1750 |
10 gal. |
Polyethelene |
$1614* |
40# |
* Fire Codes and/or Build Codes of certain jurisdictions limit the use of
polyethelene in buildings, due to the formation of toxic gases upon combustion.
HIGH WATER FLOAT SWITCH:
To add a float switch at the top of the tank to provide a high water signal for
alarm and/or cut-out, add ------ $ 465
Parts Prices:
NOTE: all list prices shown on this page are subject to parts
multipliers
