Turbine Pumps
Bulletin 152A

List Prices

Types M & T pumps are bronze-fitted peripheral regenerative turbine pumps.

Type M pumps are standard with mechanical shaft seals (packing glands are not available). Type T pumps are standard with packing glands (if mechanical seals are required, make the list price additions shown below).

If a pump only is required, use the list prices shown just below. If a pump and motor unit is required, add the list price of the pump to the list price of the motor, base and coupling from the table further down on this page. Also add the applicable shipping weights.

Type M pumps are the current style, and are recommended for general service. Type T pumps are offered primarily for use as replacements on older HT and BFT units.

Note that both the letter "I" and the number "1" are used in the M & T model numbers shown below.

Type M & T,  PUMPS ONLY

MECHANICAL SEALS FOR TYPE T PUMPS:
4 & 5 Series   ---   $465
6 series   ---   $600

TYPE M & T LIMITATIONS:
Maximum case working pressure (Type M) Series 4   ---   400#
Maximum case working pressure (Type M) Series 5, 6 & 7   ---   600#
Maximum suction pressure (Type M) All series   ---   150#
Maximum temperature (Type M) All series   ---   225°F

Maximum case working pressure (Type T) All series   ---   300#
Maximum suction pressure (Type T) Series 4   ---   75#
Maximum suction pressure (Type T) Series 5   ---   150#
Maximum suction pressure (Type T) Series 6   ---   275#
Maximum temperature (Type T) with standard packing glands   ---   275°F
Maximum temperature (Type T) with standard mechanical shaft seals   ---   225°F

TURBINE PUMP MODEL NUMBERS:
The following examples explain the makeup of the model numbers for Type M and Type T turbine pumps and pump and motor units.

Type M Example: 142G-3-4
                    '14' = Pump series (14=4 series; 15=5 series; 16=6 series).
                    '2' = Number of pump stages.
                    'G' = Pump Size
                    '3' = Motor Horsepower
                    '4' = RPM of motor (4=1750 RPM; 2=3450 RPM). Motor horsepower.

Type T Example: G4T-3-4
                    'G' = Pump Size
                    '4' = Pump Series (4, 5, or 6).
                    'T' = Number of pump stages (T= 2-stage; no T= 1-stage)
                    '3' = Motor Horsepower
                    '4' = RPM of motor (4=1750 RPM; 2=3450 RPM).

MOTOR, BASE AND COUPLING ADDITIONS:
Make the following list price additions to the pump list prices from M/T Table above if a complete pump and motor unit (on steel base with flexible coupling) is required. Also make the weight additions shown.